Backyard Industry Syndicated Content
This website is for dealers to view available brand content that can be syndicated to their own websites.
Navigate Brand Categories
view full size
Oval Above Ground
Our pools are made wholly of treated pine, a material whose quality greatly exceeds that of cedar. And to enhance its performance even more, Aqua-Wood uses pine that has undergone a chemical treatment that makes it even more durable.
Specs
Structural panels
Copper-azole-treated yellow pine.
Width: 4’ (1.22 m).
Factory-assembled with plain planks roughly 3½” (8.9 cm) wide, mortise and tenon moulded.
Height of walls: 52” (1.32 m).
Round wall panels
Flexible.
Their number determines the size of the pool.
Straight wall panels
Made by converting flexible panels into rigid panels using longitudinal steel tube reinforcements with the following dimensions: 1 ½” x 2 ½” x 1/8” (3.81 cm x 6.35 cm x 3.175 mm).
Pre-treated with zinc phosphate by 11-step immersion (E-coat) for greater protection against corrosion (subjected to 2000-hour salt fog resistance testing) and covered with polyester powder paint.
Galvanized steel parts are used for straight wall panel assembly and visible parts are covered with polyester powder paint for maximum protection against corrosion and UV damage (parts have been subjected to humidity and salt fog resistance testing for 1500 hours).
Columns
Made of 100 % wood, sturdy and attractive.
Handcrafted at the factory then assembled with glue and screws.
Borders (Top rails)
Single-piece border made of 100 % wood, 9” (23 cm) wide – Amazone only
OR
Borders made of talc-filled resin, 9” (23 cm) wide – Savanna XL only.
Seat caps
Made of antiskid injected resin, very easy to install
Fastener cover
Attractive and safe.
Cables
Three 5/16” (8 mm) galvanized steel cables form the pool’s strong assembly.
Plastic coated for a sleek appearance and for protection from chemicals and salt.
Cable breaking point: 9,800 lbs.
Bolts, nuts and screws
Protected by a Magni 599 coating.
Salt-fog tested 1000 hours.
Approved for use with treated wood.
Insulation
Foam insulation 1/8” (3.2 mm) thick inserted between the liner and the walls, which creates a smooth surface and protects the liner.
Liner
Vinyl liner secured with a standard in ground pool fastening system, factory installed.
Packaging
Delivered on a pallet in 3 or 4 boxes, depending on the size of the pool.
Model with load strut
Straight walls supported by a load strut system made of wood.
Model without load strut (Brace)
Sturdy assembly of straight walls can be done by installing a steel beam structure with the following dimensions: 2 1/2’’ x 3 1/2’’ x 3/16’’ (6.35 cm x 8.90 cm x 4.76 mm)
Wall Height
The wall height is 52 in (132.1 cm). Flat bottom.
Request a Quote
Schedule Your Demo
"*" indicates required fields
.png){kind=logo}
